motioneyeos_ext

A small set of scripts useful to add specific functionalities to Motioneyeos (tested on Raspberry Pi Zero, but I think is possible to use on other versions of Motioneyeos)

Table of Contents

• motioneyeos_ext - Table of Contents
  • Tailscale on MotioneyeOS
  • Rclone on MotioneyeOS and Motioneye DietPi
    • Parameters
    • Configuration files
    • Sample Cron configuration
  • Motioneye and Tailscale on DietPi v8.x (Raspberry Pi ARMv6 or ARMv7)

Tailscale on MotioneyeOS

Website: Tailscale

Script: S98tailscale

To install or update Tailscale:

• Install Motioneyeos (follow this guide: https://github.com/ccrisan/motioneyeos/wiki/Installation)
• Connect via ssh to your Raspberry Pi where Motioneyeos is installed (eg.: ssh admin@192.168.1.50)
• Run the command:

curl -L https://raw.githubusercontent.com/goldfix/motioneyeos_ext/main/src/S98tailscale -o /tmp/S98tailscale && bash /tmp/S98tailscale install

• Reboot your Raspberry Pi (with the command: reboot).
• Connect via ssh to your Raspberry Pi where Motioneyeos is installed (eg.: ssh admin@192.168.1.50)
• Run the command: tailscale up and configure using your Tailscale credentials.

Rclone on MotioneyeOS and Motioneye DietPi

Website: Rclone

Script: rclone_tool.sh

To install or update Rclone:

• Install Motioneyeos or DietPi on your Raspberry Pi (follow this guide: https://github.com/ccrisan/motioneyeos/wiki/Installation or https://dietpi.com/docs/install/)
• Connect via ssh to your Raspberry Pi where you have installed Motioneyeos (or DietPi) (eg.: ssh admin@192.168.1.50)
• Run the command:

curl -L https://raw.githubusercontent.com/goldfix/motioneyeos_ext/main/src/rclone_tool.sh -o /tmp/rclone_tool.sh && bash /tmp/rclone_tool.sh install

• Reboot your Raspberry Pi (with the command: reboot).
• Connect via ssh to your Raspberry Pi where you have installed Motioneyeos (or DietPi) (eg.: ssh admin@192.168.1.50)
• Configure Rclone: rclone_tool config

Parameters

rclone_tool install: installs Rclone on your device. The destination folder of Rclone and configuration files will be: /usr/bin/.

rclone_tool config: configures Rclone, remote and local folders. The configuration procedure has two different steps. The first step configures Rclone and the second step configures the local camera folder and remote folder.

rclone_tool run <copy|move> <RCLONE_NAME_DEST>: runs Rclone. It’s possible to copy or move files. Requires the destination Rclone configuration (same used to configure it). This command is useful to be configured and scheduled with cron.

Configuration files

Two different configuration files will be create after configuration:

• /usr/bin/rclone.config: contains the credentials to access to remote folder.
• /usr/bin/rclone_local.config: contains the local data camera folder and remote folder. This file is used from command: rclone_tool run <copy|move> <RCLONE_NAME_DEST>.

Sample Cron configuration

# .---------------- minute (0 - 59)
# |  .------------- hour (0 - 23)
# |  |  .---------- day of month (1 - 31)
# |  |  |  .------- month (1 - 12) OR jan,feb,mar,apr ...
# |  |  |  |  .---- day of week (0 - 6) (Sunday=0 or 7)  OR sun,mon,tue,wed,thu,fri,sat
# |  |  |  |  |
# *  *  *  *  *  command to be executed
# *  *  *  *  *  command --arg1 --arg2 file1 file2 2>&1

*/15 *  *  *  *  /usr/bin/rclone_tool.sh run move remote

# EOF

Motioneye and Tailscale on DietPi v8.x (Raspberry Pi ARMv6 or ARMv7)

Website:

• Motioneye
• DietPi

This script permit to install Motioneye and Tailscale on your Raspberry Pi with DietPi OS. The supported version are:

• ARMv6 32-bit
• ARMv7 32-bit

Please visit the DietPi website to collect more info to install and configure your Raspberry Pi.

• Install DietPi OS on your Raspberry Pi.
• Connect via ssh to your Raspberry Pi where DietPi is installed (eg.: ssh root@192.168.1.50)
• Switch to root user.
• Run the command:

To install old version of Motioneye (with Python 2):

Script: motioneye_py2_install.sh

curl -L https://raw.githubusercontent.com/goldfix/motioneyeos_ext/main/src/motioneye_py2_install.sh -o /tmp/motioneye_py2_install.sh && bash /tmp/motioneye_py2_install.sh

To install new version of Motioneye (with Python 3):

Script: motioneye_py3_install.sh

curl -L https://raw.githubusercontent.com/goldfix/motioneyeos_ext/main/src/motioneye_py3_install.sh -o /tmp/motioneye_py3_install.sh && bash /tmp/motioneye_py3_install.sh

To update: https://github.com/motioneye-project/motioneye/tree/dev#upgrade

• Reboot your Raspberry Pi (with the command: reboot).
• Connect via ssh to your Raspberry Pi where DietPi is installed (eg.: ssh root@192.168.1.50)
• Run the command: tailscale up and configure using your Tailscale credentials.
• Connect local Motioneye website (eg.: http://192.168.1.50:8765). Remember to use the port: 8765.
• To install Rclone follow this guide: Rclone on MotioneyeOS and Motioneye DietPi